Übersicht Spezifikationen Kabel Zubehör Kontakt


Spezifikationen

General Features
Bildsensor / Image Device 1/3 type Progressive Scan CCD
Effektive Pixelanzahl 659 (H) x 494 (V)
Pixelgröße 7.4 µm (H) x 64.4 µm (V)
Objektivanschluß / Lens Mount NF mount
Verstärkung / Gain Fixed/Manually Adjustable
Mindestlichtstärke 400 lx (F8, y=OFF, FIX GAIN (0dB)
Sensitivity 1.0 Vp-p, sync. Negative, 75 Ω, unbalanced
Signalsystem Internal/External (automatically switched according to input signal)
Sync system HD/VD (HD/VD level: 2 to 5 Vp-p)
Effects 12.0 mm
Aspect Ratio 58 dB
Signalrauschabstand / S/N Ratio Normal Shutter, Restart/Restet
External Trigger shutter mode (Mode1/Mode2)
Blende / Shutter 1/100, 1/25, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/8000, 1/15000 s
Verschlußzeit / Shutter Speed Polarity: +2µs to 250ms; Input impedence: 10 kΩ or more
(H: +2 to 5.0V; L: 0 + 0.6V)
External Trigger DIP switch setting 1/100, 1/25, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/8000, 1/10000, 1/25000, 1/50000, 1/100000 s
Tigger pulse width settings: 1/4 to 1/100000 s
External Trigger Shutter 1 (fixed)
Power requirements +12 V DC (range: +10.5 to 15 V)
Stromverbrauch / Power consumption 2.2 W
Abmessungen / Dimensions CHU: 22 x 22 x 30 mm
CCU: 29 x 29 x 67 mm
Gewicht / Mass CHU: Approximately 40g
CCU: Approximately 100g
Betriebstemperatur / Operation temperature -5 to 45 °C
Performance Guarantee Temperature: 0 to 40 °C
Lagerungstemperatur / Storage Temperature -30 to 60 °C (-22 to +140 °F)
Operation humidity 20 to 80% (no condensation)
Mitgeliefertes Zubehör / Supplied accessories Lens mount cap (1), Operating Instructions (1), Dedicated cable (1), Ferrite core (1)
Vibration 10G (20Hz to 200 Hz)
Stoßfestigkeit / Shock resistance 70G
Regulations UL 6500, FCC Class A Digital Device, CE (EN61326(97 + A1/98)
Special Features
Output modes Normal: 1 -line sequential output 29,97 fps
Binning: F2 -line sequential output 59,94 fps
Horizontal resolution 500 TV lines
Horizontal frequency 15,734 KHz
Scanning System 525-lines/236-lines (Normal mode/Binningmode)
Jitter Less than 20 ns
Pin assignment Correspondence to EIAJ compliant 12PIN connector pin assignment Unvailable (No. 8 pin: Trigger input (G), No. 9 pin: Trigger input, No. 10 pin: GRD, No. 11 pin: + 10V)
Pins No. 10 and 11 are not connected inside the camera